Home > Industrial First Aid > First Aid Kits > Contractor First Aid Kits

Contractors First Aid Kits: Construction Site First Aid Kits for Compliance & Safety

We realized that there is a need for an economical, straightforward, basic, no frills contractor first aid kit. Contractor First Aid Kits were developed to address the growing and under-served first aid needs of the contractor market. We strongly feel that every contractor should own a first aid kit to be prepared for all injuries that potentially could happen on a jobsite. OSHA also requires that adequate first aid supplies should be available for employees. Also, these Contractors and Construction Kits are unique in that they are Doctor recommended as OSHA, ANSI/ISEA and Cal/OSHA compliant - we searched high and low for a kit that a physician would recommend to comply with California's strict OSHA guidelines for Construction and found these for you. You can even request a letter from our MD recommending this kit with your order!

Contractor´s injuries are diverse, but their basic first aid needs are simple. Their jobs are strenuous, tiring and the occurrence of minor injuries is extremely high. For minor injuries, an adequate first aid kit will allow the injured person or co-workers to administer first aid and get the employee back to work. For major injuries, the contents of a construction first aid kit can be used to provide first care to the injured person, before an EMT or ambulance arrives. It could mean a matter of life and death. A construction site safety survey should always be conducted to ensure that the proper first aid supplies are available for the types of injuries that may occur at any jobsite. See our 10, 25 and 50 person OSHA & ANSI / ISEA Compliant Construction First Aid kits below... We've got your Construction First Aid Compliance needs covered! These kits are appropriate for Construction Worksites and Contractor use to comply with Federal OSHA regulation 1910.151(b), ANSI Z308.1-2009, ANSI Z308-1-2009 as well as Cal/OSHA 3400 section guidelines and Cal/OSHA Title 7, Subchapter 4. Construction Safety Orders §1512.

Construction First Aid - Contractors First Aid Kits / Job Site First Aid Kit / Type iii First Aid Kits

Also See OSHA CONSTRUCTION BOOKS & GUIDES & Live Construction Safety Training including Forklift Safety Training & THESE KITS CAN BE CUSTOM LABELED!

Bilingual Contractor's First Aid Kit - 10 person - 91 Pieces (plastic)


Bilingual Contractor's First Aid Kit - 10 person - 91 Pieces (plastic)

ITEM / SKU: 9300-10P

Bilingual Contractor's First Aid Kit - 10 person - 91 Pieces (plastic)

These Contractor's First Aid Kits were developed to address the growing and underserved needs of contractors. Economical and basic, these first aid kits are perfect for every contractor to be prepared for all potential injuries.

OSHA requires that adequate first aid supplies should be available for all employees at a job site. A site survey should always be conducted to ensure proper types and quantities of first aid supplies for injuries that may occur. ( This First Aid Kit can be Custom Labeled with your own Brand, Slogan, Logo or Imprint )

Click Here to View More Images of Bilingual Contractor's Kit & Contents

Bilingual Contractor's First Aid Kit - 10 person - 91 Pieces (plastic)The contents of a first aid kit can be used to provide care before help arrives. It could mean a matter of life or death.

Kit Includes:

(1) Plastic case w/gasket,7-11/16" x 4-9/16" x 2-3/8"
(30) 1" x 3" Adhesive plastic bandages*
(3) Knuckle fabric bandages
(3) Fingertip fabric bandages, large
(1) 3" Conforming gauze roll bandage
(1) 40" Triangular sling/bandage, w/2 safety pins*
(4) 3" x 3" Gauze dressing pads*
(1) 5" x 9" Trauma pad*
(30) Antiseptic cleansing wipes (sting free)*
(10) First aid/burn cream pack, 0.9 gm
(1) 1/2" x 10 yd. First aid tape roll*
(1)4-1/2" Scissors, nickel plated
(1)4" Tweezers, plastic, one time use
(4) Exam quality gloves, 2 pairs*
(1) First Aid Guide

ANSI Z308.1-2009
Type I, II or III

!Caution: This kit meets ANSI Z308.1-2009 only when the required minimum fill is maintained.

*Required Minimum Fill:

1 Absorbent compress, 4 x 8 in. minimum (206 sq. cm)
16 Adhesive bandages, 1 x 3 in. (2.5 x 7.5 cm)
1 5 yd. Adhesive tape (457 cm)
2 Pair medical exam gloves
10 Antiseptic applications, 0.14 fl oz. each (0.5 g)
4 Sterile pads, 3 x 3 in. minimum (7.5 x 7.5 cm)
1 Triangular bandage, 40 x 40 x 56 in. minimum
(101 x 101 x 142 cm)
6 Burn treatment applications, 1/32 oz. each (0.9 g)


Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (plastic)


Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (plastic)

ITEM / SKU: 9301-25P

Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (plastic)

These Contractor's First Aid Kits were developed to address the growing and underserved needs of contractors. Economical and basic, these first aid kits are perfect for every contractor to be prepared for all potential injuries.

OSHA requires that adequate first aid supplies should be available for all employees at a job site. A site survey should always be conducted to ensure proper types and quantities of first aid supplies for injuries that may occur. ( This First Aid Kit can be Custom Labeled with your own Brand, Slogan, Logo or Imprint )

Click Here to View Bilingual Contractor's 25 Person Kit Contents

The contents of a first aid kit can be used to provide care before help arrives. It could mean a matter of life or death.

Kit Includes:

(1) Plastic case w/gasket,9-1/16" x 6-5/16" x 2-3/8"
(100) 1" x 3" Adhesive plastic bandages*
(3) Knuckle fabric bandages
(3) Fingertip fabric bandages, large
(1) 3" Conforming gauze roll bandage
(1) 40" Triangular sling/bandage, w/2 safety pins*
(6) 3" x 3" Gauze dressing pads*
(1) 5" x 9" Trauma pad*
(42) Antiseptic cleansing wipes (sting free)*
(10) bx First aid/burn cream pack, 0.9 gm*
(1) 4" x 5" Instant cold compress
(1) 1/2" x 10 yd. First aid tape roll*
(1) 4-1/2" Scissors, nickel plated
(1) 4" Tweezers, plastic, one time use
(4) Exam quality gloves, 2 pairs*
(1) First Aid Guide

ANSI Z308.1-2009
Type I, II or III

!Caution: This kit meets ANSI Z308.1-2009 only when the required minimum fill is maintained.

*Required Minimum Fill:

1 Absorbent compress, 4 x 8 in. minimum (206 sq. cm)
16 Adhesive bandages, 1 x 3 in. (2.5 x 7.5 cm)
1 5 yd. Adhesive tape (457 cm)
2 Pair medical exam gloves
10 Antiseptic applications, 0.14 fl oz. each (0.5 g)
4 Sterile pads, 3 x 3 in. minimum (7.5 x 7.5 cm)
1 Triangular bandage, 40 x 40 x 56 in. minimum (101 x 101 x 142 cm)
6 Burn treatment applications, 1/32 oz. each (0.9 g)

Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (metal)


Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (metal)

ITEM / SKU: 9302-25M

Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (metal)

These Contractor's First Aid Kits were developed to address the growing and underserved needs of contractors. Economical and basic, these first aid kits are perfect for every contractor to be prepared for all potential injuries.

OSHA requires that adequate first aid supplies should be available for all employees at a job site. A site survey should always be conducted to ensure proper types and quantities of first aid supplies for injuries that may occur. ( This First Aid Kit can be Custom Labeled with your own Brand, Slogan, Logo or Imprint )

Click Here to View More Images of Bilingual Contractor's Metal Kit Contents

Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (metal)The contents of a first aid kit can be used to provide care before help arrives. It could mean a matter of life or death.

Kit Includes:

  • (1) Metal case none gasketed, 10-1/2" x 7-1/2" x 2-1/2"
  • (100) 1" x 3" Adhesive plastic bandages*
  • (3) Knuckle fabric bandages
  • (3) Fingertip fabric bandages, large
  • (1) 3" Conforming gauze roll bandage
  • (1) 40" Triangular sling/bandage, w/2 safety pins*
  • (6) 3" x 3" Gauze dressing pads*
  • Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (metal)
  • (1) 5" x 9" Trauma pad*
  • (42) Antiseptic cleansing wipes (sting free)*
  • (10) bx First aid/burn cream pack, 0.9 gm*
  • (1) 4" x 5" Instant cold compress
  • (1) 1/2" x 10 yd. First aid tape roll*
  • (1) 4-1/2" Scissors, nickel plated
  • (1) 4" Tweezers, plastic, one time use
  • (4) Exam quality gloves, 2 pairs*
  • (1) First Aid Guide

ANSI Z308.1-2009
Type I, II or III

!Caution: This kit meets ANSI Z308.1-2009 only when the required minimum fill is maintained.

*Required Minimum Fill:

  • 1 Absorbent compress, 4 x 8 in. minimum (206 sq. cm)
  • Bilingual Contractor's First Aid Kit - 25 person - 176 Pieces (metal)
  • 16 Adhesive bandages, 1 x 3 in. (2.5 x 7.5 cm)
  • 1 5 yd. Adhesive tape (457 cm)
  • 2 Pair medical exam gloves
  • 10 Antiseptic applications, 0.14 fl oz. each (0.5 g)
  • 4 Sterile pads, 3 x 3 in. minimum (7.5 x 7.5 cm)
  • 1 Triangular bandage, 40 x 40 x 56 in. minimum (101 x 101 x 142 cm)
  • 6 Burn treatment applications, 1/32 oz. each (0.9 g)

Bilingual Contractor's First Aid Kit - 50 person - 236 Pieces (plastic)


Bilingual Contractor's First Aid Kit - 50 person - 236 Pieces (plastic)

ITEM / SKU: 9303-50P

Bilingual Contractor's First Aid Kit - 50 person - 236 Pieces (plastic)

These Contractor's First Aid Kits were developed to address the growing and underserved needs of contractors. Economical and basic, these first aid kits are perfect for every contractor to be prepared for all potential injuries.

OSHA requires that adequate first aid supplies should be available for all employees at a job site. A site survey should always be conducted to ensure proper types and quantities of first aid supplies for injuries that may occur.

Click Here to View More Images 50 Person Bilingual Contractor's Kit Contents

The contents of a first aid kit can be used to provide care before help arrives. It could mean a matter of life or death.

Kit Includes:

Bilingual Contractor's First Aid Kit - 50 person - 236 Pieces (plastic)
  • (1)Plastic case w/gasket, 9-3/16" x 9-3/16" x 2-3/4"
  • (125)1" x 3" Adhesive plastic bandages*
  • (6)Knuckle fabric bandages
  • (6)Fingertip fabric bandages, large
  • (2)3" Conforming gauze roll bandages
  • (2)40" Triangular sling/bandages, w/2 safety pins*
  • (12)3" x 3" Gauze dressing pads*
  • (2)5" x 9" Trauma pad*
  • (60)Antiseptic cleansing wipes (sting free)*
  • (10)First aid/burn cream pack, 0.9 gm*
  • (2)4" x 5" Instant cold compresses
  • Bilingual Contractor's First Aid Kit - 50 person - 236 Pieces (plastic)
  • (2)1/2" x 10 yd. First aid tape roll,*
  • (1)4-1/2" Scissors, nickel plated
  • (1)4" Tweezers, plastic, one time use
  • (4)Exam quality gloves, 2 pairs*
  • (1)First Aid Guide

ANSI Z308.1-2009
Type I, II or III

!Caution: This kit meets ANSI Z308.1-2009 only when the required minimum fill is maintained.

*Required Minimum Fill:

  • 1 Absorbent compress, 4 x 8 in. minimum (206 sq. cm)
  • 16 Adhesive bandages, 1 x 3 in. (2.5 x 7.5 cm)
  • 1 5 yd. Adhesive tape (457 cm)
  • 2 Pair medical exam gloves
  • 10 Antiseptic applications, 0.14 fl oz. each (0.5 g)
  • 4 Sterile pads, 3 x 3 in. minimum (7.5 x 7.5 cm)
  • 1 Triangular bandage, 40 x 40 x 56 in. minimum (101 x 101 x 142 cm)
  • 6 Burn treatment applications, 1/32 oz. each (0.9 g)
  • These Construction, Management, and Contractor first aid kits meet the federal OSHA regulation 1910.151(b) and the ANSI Z308.1-2009 requirement. This will assure each contractor that they own a first aid kit complying with the basic requirements in their industry.
  • These Contractor First Aid kits contain a superior variety of quality first aid products to ensure preparedness for on-the-spot treatment of minor first aid needs.
  • Plastic first aid case with gasket will ensure that contents will resist moisture if exposed to the elements, as well as protecting the interior upholstery of a work truck. Metal first aid case (25 person only) is offered should a contractor prefer a more durable case
  • Once a first aid kit is opened, all products are very visible, well organized, and accessible, making it easy for the user to quickly identify product needed.
  • Front label clearly identifies the type of kit, states OSHA/ANSI regulation compliance; while back contents label lists contents of the contractor first aid kit, which will assure the contractor that this product meets the needs of their workers. This will also be beneficial in a retail storefront environment where contractor will be able to view contents before purchase.

Use these kits for construction and maintenance, construction, construction equipment, home construction, construction company, construction managers, construction project management, building construction, as construction material, in the construction industry, for a construction contractor, to manage construction cost, for the injury of a construction worker, in heavy construction, as a construction supply, to deal with a construction accident, as a construction tool, for house construction or other construction services.

Keep at each construction site for all construction first aid needs. This will help maintain you construction safety around construction safety equipment, during road construction safety and for construction site safety. This is the ultimate new construction safety product, perfect for construction safety supply to maintain construction health and safety, as well as construction job site safety, for building construction and safety, before your construction safety inspection or construction safety audit.

Construction safety management should use this construction safety solution to assure OSHA construction safety in each construction safety work zone or for construction safety for public, as well as contractor safety. Make one a part of each contractor safety plan, which should always include contractor first aid, whether you are a residential general contractor, general contractor, contractor builder services, concrete contractor, building contractor, roofing contractor, remodeling contractor, roof contractor, commercial contractor, residential contractor, dry wall contractor, electric contractor, home improvement contractor, mechanical contractor, siding contractor, masonry contractor, or residential building contractor.

This is the most important contractor supply not to be found in your contractor warehouse. Also remember Required OSHA FIrst Aid & CPR Training for Construction.

Also See OSHA CONSTRUCTION BOOKS & GUIDES & Live Construction Safety Training including Forklift Safety Training

Federal OSHA 29 CFR
Help your company in the oil and gas industry protect its workers and stay compliant with OSHA mandates.

Federal OSHA 29 CFR Standards 1910 & 1926

Oil & Gas Regulations
Oil & Gas

Oil & Gas Industry
OSHA Regulations

Cal / OSHA Safety
Cal / OSHA Handbooks & DVDs for Industry Safety, Construction Safety, OSHA Compliance & Electrical / General Safety.

Cal / OSHA Safety Books CDs & Forms

Copyright © 2001 - First-Aid-Product.com, a division of Express Companies, Inc., & a Member of the Safety.com family of Safety Providers - all rights reserved


Red Cross Ready Rating Program - Member 2011



F-A-P News