Operation:
1. Open battery compartment door (4) by sliding it sideways, then insert batteries.
2. Insert earphone plug into the earphone jack. (Earphone cable acts as the radio's antenna)
3. Turn on the receiver by sliding the volume knob to the desired volume level.
4. Press the Reset Button (2) once to start the receiver at the lowest frequency (88MHz).
5. Press the Scan Button (3) once to automatically find an active broadcast.
6. Press the Scan Button (3) repeatedly to scan for broadcasts on higher frequencies.
7. To start scanning from the lowest frequency again, press the Rest Button and then the Scan Button. Note: If pressing the Scan Button produces no change, you are at the highest frequency and need to press the Reset Button to start over from the lowest frequency (88MHz).

Specifications:
Frequency range: FM 88-108MHz
Power Source: 2 AAA batteries 1.5V
Antenna: Earphone cable antenna